Warning: Undefined array key "ver" in /home/httpd/vhosts/msr.ch/httpdocs/msr.ch/affiliate/en/msr145w2d.php on line 3 Warning: Cannot modify header information - headers already sent by (output started at /home/httpd/vhosts/msr.ch/httpdocs/msr.ch/affiliate/en/msr145w2d.php:3) in /home/httpd/vhosts/msr.ch/httpdocs/msr.ch/affiliate/en/msr145w2d.php on line 294 Warning: Undefined variable $redirectUrl in /home/httpd/vhosts/msr.ch/httpdocs/msr.ch/affiliate/en/msr145w2d.php on line 296 MSR Electronics GmbH
MSR Modular Signal Recorder

WiFi Wireless Data Logger MSR145W2D

Wireless data logger (WiFi) for monitoring temperature, humidity, fluid pressure, air pressure, acceleration, strain gauges and more.

The new mini logger from MSR stores over one million measured values. By integration with a WLAN/WiFi network, the data logger can be used to flexibly implement practically any kind of measurement applications.

General functions

  • wireless data logger (WiFi) for monitoring temperature, humidity, fluid pressure, air pressure, acceleration, strain gauges and more
  • internal sensors and up to five external sensors (see configurator)
  • FlexConnector for exchangeable sensors
  • more than 1 million measured values storage capacity in the internal memory
  • free MSR PC software for commissioning and operation of the data logger

WLAN (WiFi) functions

  • integration either into an existing WiFi or via an access point, by means of mobile network access where required, into a separate wireless network
  • WiFi range can be extended with a commercially available repeater
  • data storage is guaranteed even if the transmitter fails
  • alarm message if limit value is exceeded
  • MSR SmartCloud: retrieve, analyse and export measured data online at any time; alarm message if limit value is exceeded
  • free MSR WLAN software for graphical visualization of the measured values transmitted over WiFi (WLAN), components for LabVIEW available

Configure your own custom MSR145W2D variant here!

With a few clicks you are able to select and request a no-obligation quotation of your desired MSR145W2D.

1. Select the housing and the corresponding battery.

Housing Type and battery Picture Size & weight Medium Sheat
material		 Item no.
Standard
IP 60		 Design housing
with 230 mAh battery,
OLED display and
WiFi		 35 x 17 x 57 mm
(W x H x L)
approx. 27 g		 Air PC, not
encapsulated		 145W2DB25
Design housing
with 900 mAh battery,
OLED display and
WiFi
 35 x 25 x 57 mm
(W x H x L)
approx. 43 g		 Air PC, not
encapsulated		 145W2DB23
Waterproof
IP 67		 Design housing
with 230 mAh battery,
OLED display and
WiFi		 35 x 17 x 57 mm
(W x H x L)
approx. 36 g		 Air,
various liquids		 PC,
encapsulated		 145W2DB26
Design housing
with 900 mAh battery,
OLED display and
WiFi		 35 x 25 x 57 mm
(W x H x L)
approx. 62 g		 Air,
various liquids		 PC,
encapsulated		 145W2DB22

2. Select the configuration.

You can select various internal sensors as well as up to five external sensors or connectors.

Measured parameter /
Measurement/
storage rate		 Technical data Internal External (according to cable length)
0.20 m 1.00 m 1.60 m
Temperature

1/s to every 12 h		 Working range:
external: -40...+125 °C
internal: -20...+65 °C
Max. deviation:
±0.1 °C (-25...+55 °C)
±0.3 °C (-40...+125 °C)		 Item no. T9
 Item no. FT9/020

 Item no. FT9/100

 Item no. FT9/160
Working range:
-55...+125 °C
Max. deviation:
±0.5 °C (10...+70 °C)
±2 °C (-55...+125 °C)		 only available
externally 		Item no. FT2/020

 Item no. FT2/100

 Item no. FT2/160
Connector for thermal
element of Type K
(without sensor)


1/s to every 12 h		 Working range:
-200...+1350 °C		 only available
externally 		Item no. FT3/020

 Item no. FT3/100

 Item no. FT3/160
Humidity
with integrated
temperature

1/s to every 12 h		 Working range:
0...100 % rel. humidity
external: -40...+125 °C
internal: -20...+65 °C
Max. deviation:
±2 % rel. humidity
(10...80 %, +25 °C)
±3 % rel. Feuchte
(80...100 %, +25 °C)
 Item no. H3
 Item no. FH3/020

 Item no. FH3/100

 Item no. FH3/160
Air pressure absolute,
with integrated
temperature

1/s to every 12 h		 Working range:
10...2000 mbar absolute
external: -40...+85 °C
internal: -20...+65 °C
Max. deviation:
±2 mbar
(750...1100 mbar absolute,
+25 °C)		 Item no. P5
 Item no. FP10/020

 Item no. FP10/100

 Item no. FP10/160
Working range:
0...14 bar absolute
-20...+65 °C
Max. deviation:
±50 mbar
(1...10 bar abs., +25 °C)		 only available
externally 		Item no. FP7/020

 Item no. FP7/100

 Item no. FP7/160
Fluid pressure
with integrated
temperature

1/s to every 12 h

Material in contact with
media:
  • Stainless Steel
    AISI 316L
    (DIN 1.4404 / 1.4435)
  • O-rings:
    Viton® 70° Shore
 Working range:
-1000...3000 mbar relative
-20...+85 °C
Max. deviation:
±30 mbar (1% FS)		 only available
externally 		Item no. FP9/020

 Item no. FP9/100

 Item no. FP9/160
Working range:
0...3000 mbar absolute
-20...+85 °C
Max. deviation:
±30 mbar (1% FS)		 only available
externally 		Item no. FP3/020

 Item no. FP3/100

 Item no. FP3/160
Working range:
0...30 bar absolute
-20...+85 °C
Max. deviation:
±0.3 bar (1% FS)		 only available
externally 		Item no. FP4/020

 Item no. FP4/100

 Item no. FP4/160
Working range:
0...400 bar absolute
-20...+85 °C
Max. deviation:
±4 bar (1% FS)		 only available
externally 		Item no. FP8/020

 Item no. FP8/100

 Item no. FP8/160
Working range:
0...1000 bar absolute
-20...+85 °C
Max. deviation:
±10 bar (1% FS)		 only available
externally 		Item no. FP12/020

 Item no. FP12/100

 Item no. FP12/160
3-axis-acceleration
(static)

1/s to every 12 h		 Working range:
-15...+15 g
-20...+65 °C
Max. deviation:
±0.15 g (0...5 g, +25 °C)
±0.25 g (5...10 g, +25 °C)
±0.45 g (10...15 g, +25 °C)		 Item no. A
 Item no. FA/020
 Item no. FA/100
 Item no. FA/160
Light

1/s to every 12 h		 Working range:
0...83'000 lx
Max. sensitivity
at 550 nm		 Item no. L3
 Item no. FL3/020

 Item no. FL3/100

 Item no. FL3/160
Connection for
strain gauges		 Characteristics:
  • full bridge
  • rated output 1 mV/V
  • bridge voltage 3 V
 only available
externally 		Item no. FD/020

 Item no. FD/100

 Item no. FD/160
Analogue inputs
(resolution: 12 bit)

1/s to every 12 h		 Input configuration:




 		only available
externally 		Exxxx/020
 Exxxx/100
 Exxxx/160
Input configuration:




 only available
externally 		Exxxx/020
 Exxxx/100
 Exxxx/160
Control terminal Characteristics:
  • Alarm output
  • Input for starting and
    stopping data recording
  • 3 V voltage output
 only available
externally 		Item no. FY/020
 Item no. FY/100
 Item no. FY/160
FlexConnector
(only combined with
B22 and B23 cases)		 The appropriate Flex
Sensors are below
presented for choice.		 only available
externally 		Item no. FX/020
 Item no. FX/100
 Item no. FX/160

3. Choose the FlexSensors if required.

If you have selected a FlexConnector or already own an MSR145W2D data logger with a FlexConnector, you can order suitable sensors here. Please note only one interchangeable FlexSensor can be connected to the FlexConnector at a time.

Measured parameter /
Measurement/
storage rate		 Technical data Item no.
Temperature

1/s to every 12 h		 Working range:
-40...+125 °C
Max. deviation:
±0.1 °C (-25...+55 °C)
±0.3 °C (-40...+125 °C)		 FXT9/160
Humidity
with integrated
temperature

1/s to every 12 h		 Working range:
0...100 % rel. humidity
-40...+125 °C
Max. deviation:
±2 % rel. humidity
(10...80 %, +25 °C)
±3 % rel. Feuchte
(80...100 %, +25 °C)
 FXH3/160
Fluid pressure
with integrated
temperature

1/s to every 12 h

Material in contact with
media:
  • Stainless Steel
    AISI 316L
    (DIN 1.4404 / 1.4435)
  • O-rings:
    Viton® 70° Shore
 Working range:
-1000...3000 mbar relative
-20...+85 °C
Max. deviation:
±30 mbar (1% FS)		 FXP9/160
Working range:
0...3000 mbar absolute
-20...+85 °C
Max. deviation:
±30 mbar (1% FS)		 FXP3/160
Working range:
0...30 bar absolute
-20...+85 °C
Max. deviation:
±0.3 bar (1% FS)		 FXP4/160
Working range:
0...400 bar absolute
-20...+85 °C
Max. deviation:
±4 bar (1% FS)		 FXP8/160
Working range:
0...1000 bar absolute
-20...+85 °C
Max. deviation:
±10 bar (1% FS)		 FXP12/160
3-axis-acceleration
with Fast Peak
(800 Hz)

1/s to every 12 h		 Working range:
-15...+15 g
-20...+65 °C
Max. deviation:
±0.15 g (0...5 g, +25 °C)
±0.25 g (5...10 g, +25 °C)
±0.45 g (10...15 g, +25 °C)		 FXA4/160
Light

1/s to every 12 h		 Working range:
0...83 000 lx
Max. sensitivity at 550 nm		 FXL3/160

4. Do you require a router to send the measurement data via WiFi?

A router will be needed if your MSR145W2D device is incorporated into a separate WiFi network or if measurement data is to be sent to MSR SmartCloud via a mobile network.

Device/Service Description Item no.
WiFi router FRITZ!Box 6820 LTE WLAN access point (access to mobile network) N10130
SIM card
(EU version)
  • 1 SIM card
  • Sending data via mobile network to MSR SmartCloud for the first 12 months.
 N10111
Extension
(EU version)		 Sending data via mobile network to MSR SmartCloud for subsequent 12 month period. N10113

5. The use of MSR SmartCloud.

The cloud solution managed by MSR Electronics GmbH records data measured by MSR data loggers in a database. Through online access to MSR SmartCloud you are able to gain insight into your measured data, manage it, and create alert messages. When ordering the MSR145W2D data logger you will automatically receive the access code to MSR SmartCloud.

Service Description
MSR SmartCloud Free access to MSR SmartCloud when you purchase the MSR145W2D data logger.
Data capacity up to 100,000 measurements, Data memory up to three months.

6. Contact us for prices and delivery terms!

Make a price enquiry by telephone, fax or e-mail

The following codes denote the type of datalogger and sensors you have selected. When making price enquiries by telephone, fax or e-mail, please have the codes ready.

Warning: Undefined variable $companyName in /home/httpd/vhosts/msr.ch/httpdocs/msr.ch/affiliate/en/msr145w2d.php on line 1437
Phone: Warning: Undefined variable $phoneNumber in /home/httpd/vhosts/msr.ch/httpdocs/msr.ch/affiliate/en/msr145w2d.php on line 1438
Fax: Warning: Undefined variable $faxNumber in /home/httpd/vhosts/msr.ch/httpdocs/msr.ch/affiliate/en/msr145w2d.php on line 1439
E-mail: Warning: Undefined variable $emailAddress in /home/httpd/vhosts/msr.ch/httpdocs/msr.ch/affiliate/en/msr145w2d.php on line 1440

Product codes:

Making price enquiries using the contact form

Please provide us with your contact details on the following online form and send your enquiry with a click of your mouse – we will be pleased to send you a no-obligation quotation!

Title*  
First name    
Surname*    
Company    
Number, street    
Zip code/postcode    
City    
Country*    
Phone    
Fax    
E-mail*    
 
Notes (please enter the number of units you require here):
 

*Mandatory fields

7. General technical data of the MSR145W2D.

Memory capacity: Over 1 000 000 measured values.
Key button: With the button you can activate and deactivate the
display, the WiFi-module and the data recording.
LED:  
Blue:
Red:
Yellow:
 Record indicator
Alarm indicator
Battery charge indicator
Power supply: Lithium-polymer battery, rechargeable via the USB connection
OLED display: High-contrast, brilliant OLED (organic light-emitting diode) colour display
to show data and graphical charts, resolution 96 x 64 pixels.
Interface: USB, WLAN (WiFi)
Operation conditions:
Temperature: -20...+65 °C
Storage conditions:
Temperature:
Humidity:		 +5...+45 °C (ideal storage conditions for the battery)
10...95 % relative humidity, non-condensing
Standards: The MSR145W2D complies with EU-Directives RoHS/WEEE.