MSR385WD: Data Logger With Wireless Transmission – LTE or LAN Terminal for Remote Climate Monitoring
wireless data logger for temperature, humidity, air pressure · 1 million measured values storage capacity · transmitter modules for operating temperatures up to +125 °C · ideal for long-term monitoring of climate values
Temperature-resistant transmitter modules MSR385SM
The transmitter modules equipped with temperature, humidity and/or air pressure radio sensors transmit the measured values to the MSR385WD data logger in an ISM band that can be used licence-free. Due to their heat resistance, the transmitter modules – depending on the housing type – allow metrological applications even at high working temperatures of up to +125°C. Thanks to the compact housing, they can also be placed in locations that are difficult to access. Optimised power management ensures that the power supply of the transmitter modules is guaranteed for over ten years, depending on the enclosure type, frequency of measurements and transmission interval.
MSR385WD data logger: receiving station with LTE or LAN and USB interface
The centrepiece of the wireless measurement system is the MSR385WD data logger, which is equipped with a memory capacity of more than one million measured values. This multi-channel data logger has an integrated ISM band receiver module through which it receives and stores data from up to ten MSR385SM transmitter modules. The data logger is supplied with power by means of a USB connection; with the integrated rechargeable 2400 mAh lithium-polymer battery, it can be operated autonomously for up to two days. A flash memory safeguards the data security in the event of a power failure. The colour OLED display of the data logger is at your disposal for simply reading the measured values locally from the transmitter modules.
Ideal for remote climate monitoring: retrieve measured data from the MSR SmartCloud
The web-based cloud service by MSR allows the user to store the measured data transmitted by the LTE/LAN terminal of the logger on a server via the Internet. This way, measured data can not only be retrieved and observed using any PC with an Internet connection, wherever you are; via MSR SmartCloud alarm messages can be received if limit values are exceeded and, if required, the data from several MSR data loggers can be shared with other people.
The measured data of the small wireless transmitter modules recorded by the data logger can be read out via a USB interface and processed further using the MSR PC software for data analysis purposes. Alternatively, you can use the optional LTE or LAN terminal to access the mobile network and to transmit the data to the MSR SmartCloud for remote monitoring at an interval that can be adjusted individually.
Configure your own custom MSR385WD variant here!
With a few clicks you are able to select and request a no-obligation quotation of your desired MSR385WD.
1. Select the temperature range and the housing of the MSR385SM transmitter module.
The level of the temperature to which you are going to expose the transmitter module determines the composition of its housing. Therefore, first of all please select the housing for the desired temperature range here. This concerns only the transmitter module – the actual data logger is selected in step 3.
| Temperature range |
Housing and battery | Picture | Size & weight | Medium | Item No. |
|---|---|---|---|---|---|
| -20...+125 °C | Silicone hose with non user replaceable 800 mAh Li-SOCl2 battery, not encapsulated, IP 60 |
 |
35 x 25 x 55 mm (W x H x L) approx. 25 g |
Air |
385SMB63 |
| Silicone hose with non user replaceable 800 mAh Li-SOCl2 battery, encapsulated, waterproof IP 67 |
|
35 x 25 x 55 mm (W x H x L) approx. 40 g |
Air, various liquids |
385SMB64 |
|
| -20...+85 °C | ABS housing with replaceable 3600 mAh Li-SOCl2 battery (> 10 years @ transmission freq. of 15 min.), external aerial, not encapsulated, IP 64 |
 |
60 x 33 x 80 mm (W x H x L) Antenna length: 93 mm approx. 120 g |
Air |
385SMB66 |
| -20...+65 °C | ABS housing with rechargeable 260 mAh LiPo battery, not encapsulated, IP 60 |
 |
38 x 15 x 78 mm (W x H x L) approx. 45 g |
Air |
385SMB65 |
Technical data MSR385SM transmitter module
| Frequency band: | Unlicensed frequency range at 868 MHz (EU version) or 915 MHz (US-Version, on request). |
| Range: | Up to 500 m (outdoors). |
| LED: | Red, status acknowledgement when button is pushed, on/off, measurement interval setting. |
| Power supply: | Rechargeable 260 mAh LiPo battery or 800 mAh Li-SOCl2 battery or replaceable 3600 mAh Li-SOCl2 battery. The LiPo battery is charged via the USB connection. Energy-efficient through optimised power management. |
| Operating conditions: | -20...+125 °C, in ABS housing -20...+65 °C or +85 °C, respectively. |
| Storage conditions: |
|
2. Select the sensors for the MSR385SM transmitter module.
You can equip the transmitter module with up to three different internal and/or external sensors. We are continuously expanding our range of sensor combinations.
| Measured parameter / Measuring/storage rate |
Working range / Accuracy |
Internal sensor |
External sensor (according to cable length) | ||
|---|---|---|---|---|---|
| 0.20 m | 1.00 m | 1.60 m | |||
| Temperature 1 s, 10 s, 1 min, 15 min, 1 h |
-40...+125 °C ±0.2 °C (-10...+50 °C) ±1 °C (-40...+125 °C) |
Item no. T5 |
Item no. FT5/020 |
Item no. FT5/100 |
Item no. FT5/160 |
| Relative humidity with integrated temperature 1 s, 10 s, 1 min, 15 min, 1 h |
0...100 % rel. humidity -40...+125 °C ±1.8 % rel. humidity (10...85 %, 0...+40 °C) ±4 % rel. humidity (85...95 %, 0...+40 °C) |
Item no. H2 |
Item no. FH2/020 |
Item no. FH2/100 |
Item no. FH2/160 |
| Air pressure absolute 1 s, 10 s, 1 min, 15 min, 1 h |
10...1100 mbar absolute -40...+125 °C ±2.5 mbar (750...1100 mbar abs., 0...+85 °C) |
Item no. P6 |
Item no. FP6/020 |
Item no. FP6/100 |
Item no. FP6/160 |
| 10...2000 mbar absolute external: -40...+85 °C internal: -20...+65 °C Max. deviation: ±2 mbar (1% FS) (750...1100 mbar absolute, +25 °C) |
Item no. P5 |
Item no. FP10/020 |
Item no. FP10/100 |
Item no. FP10/160 |
|
| 0...14 bar absolute -20...+85 °C ±40 mbar (1...10 bar abs., 0...+40 °C) |
Item no. P7 |
Item no. FP7/020 |
Item no. FP7/100 |
Item no. FP7/160 |
|
3. Select the MSR385WD Wireless Data Logger here.
If you already own a MSR385WD and wish to reorder just transmitter modules, you can skip step 3.
| General technical information on the MSR385WD wireless data logger | Item no. | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The data logger, which operates within the 868 MHz (EU version) or 915 MHz (US version, on request) ISM frequency band, receives and stores the measured data from up to ten MSR385SM transmitter modules. Flash memory for data security in the event of a power failure. Brilliant, high-contrast OLED (organic light-emitting diode) colour display.
|
385WDB61 |
||||||||||||||||||||
4. Do you require terminal for transmitting the measured data to the MSR SmartCloud?
An LTE terminal with a SIM card will be needed if measurement data is to be sent to MSR SmartCloud via a mobile network. A LAN terminal will be needed if measurement data is to be sent to MSR SmartCloud via LAN.
| Item | Description | Item no. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
LTE terminal 
|
LTE terminal, incl. short aerial and connecting cable. The SIM card for the LTE terminal can be ordered separately.
|
N10129 |
||||||||||
|
LTE aerial |
External magnetic foot aerial with 3 m cable. |
N10121 |
||||||||||
|
SIM card |
|
N10111 |
||||||||||
|
Extension |
|
N10113 |
| Item | Description | Item no. |
|---|---|---|
|
LAN terminal 
|
The MSR Base Station (LAN Box) allows automated transmission |
N10110 |
5. The use of MSR SmartCloud.
The cloud solution managed by MSR Electronics GmbH records data measured by MSR data loggers in a database. Through online access to MSR SmartCloud you are able to gain insight into your measured data, manage it, and create alert messages. When ordering the MSR385WD data logger you will automatically receive the access code to MSR SmartCloud.
| Service | Description |
|---|---|
| MSR SmartCloud | Free access to MSR SmartCloud when you purchase the MSR385WD data logger. Data capacity up to 100,000 measurements, Data memory up to three months. |
6. Contact us for prices and delivery terms!
Make a price enquiry by telephone, fax or e-mail
The following codes denote the type of datalogger and sensors you have selected. When making price enquiries by telephone, fax or e-mail, please have the codes ready.
Warning: Undefined variable $companyName in /home/httpd/vhosts/msr.ch/httpdocs/msr.ch/affiliate/en/msr385wd.php on line 1175
Phone:
Warning: Undefined variable $phoneNumber in /home/httpd/vhosts/msr.ch/httpdocs/msr.ch/affiliate/en/msr385wd.php on line 1176
Fax:
Warning: Undefined variable $faxNumber in /home/httpd/vhosts/msr.ch/httpdocs/msr.ch/affiliate/en/msr385wd.php on line 1177
E-mail:
Warning: Undefined variable $emailAddress in /home/httpd/vhosts/msr.ch/httpdocs/msr.ch/affiliate/en/msr385wd.php on line 1178